欢迎光临 浙江展威智能装备有限公司官网! 中文版  英文版
服务热线:400-8978006
网站首页 公司简介 新闻动态 产品中心 工程案例 销售网络 企业文化 现场直击 在线留言 联系我们
 
产品分类
客服咨询热线
电话:400-8978006
手机:13515738068
产品展示 当前位置:首页 >产品展示 
ZW016型松、紧式络筒机
产品描述  

ZW016松式,紧式络筒机用于生产密度均匀的筒倒筒优质染色用松式筒子纱。机器的卷绕速度可通过电脑自动控制,最高可达1100/分钟。径向防叠装置调控方便。先进的清纱及张力机构配以光电探纱可避免纱线打结缠绕。精确而灵敏的测速装置可保证卷绕长度(重量)均匀一致。是棉、麻、丝和化学纤维类纱线络筒的理想设备。

主要特点:
1.经久耐磨的金属心轴支架 2.方便开启的纱管托架中心定位结构,便于取下绕好的筒子纱。3.纱线出入口有陶瓷保护,可避免因摩擦而影响纱线重量。 4.槽筒带防尘、防缠绕装置,可防止灰尘堆积,保护转动轴承。 5.双面排列锭位,每节12锭,可多节串联安装,最多可达9节为一台(108锭) 
6.旋转销式与配重式纱线制动器方便自由控制卷绕张力。 7.弹簧托架压力平衡装置,可使卷绕开始至结束卷绕密度均匀。 8.轴向横动软边装置,可以使松式筒子纱更具均染性。 9.霍尔元件电子测长装置,保证各锭卷绕米数精确一致。 
*用户定配: 
1.特种纱管用中心定位装置 2.φ95mm槽筒,适合卷绕多种纱型 3.自洁式电动纱线制动器 4.悬挂式自动空气捻接器 5.空筒管回收输送带装置。


技术特点tec features


络筒机技术参数Technical parameters of winding machine

松式槽筒loose tube

O/D82mm,节距pitch2.5,对称型symmetrical type ( 0°)

紧式槽筒tight tube

O/D82mm,节距pitch2.5,非对称型asymmetrical type

成型筒子 松式forming bobbin ( loose )

0°圆柱型cylindrical,或圆台型round table3°30’4°20’

成型筒子 紧式forming bobbin ( tight )

3°30’4°20’5°57’9°15’(仅限于膨胀锭子only expansion spindle

自动定长automatic length

根据成品件,电子设定卷绕长度,最长可达999999according to the product , it can set the winding yarn length , maximum length 999999 meter.

配重式纱线制动器weight type yarn brake

可防止纱线在喂入时出现抖动,提供合适卷绕张力prevent yarn jitter in feed, provide appropriate winding tension

电动式上蜡装置Electric waxing device

可放入方孔蜡块,并有重力片,每锭一套均匀上蜡put into square hole wax, and gravity, each spindle uniform waxing

清结调节器cleaning regulator

可方便调节清结刀门间隙it can rasy to cleaning and regulate the distance of knife gete.

横动软边traversing gear

每节独立电机驱动,横动量可调each independent motor drive, the transverse momentum can be adjusted

配置set

每节12each section of 12 spindles

组合combination

最大10节连成一台共120锭 max 10 sections connect 1 set 120 spindle

驱动方式Drive mode

每锭配一长轴变频马达,每面最多60锭,由1只变频器控制Each spindle is equipped with a long axis variable frequency motor, with up to 60 spindles per side, and is controlled by 1 inverters.

最高速度 max speed

1100/分钟,每面卷绕均可独立设置1100 M / min, each side can be set up independently

导纱动程traverse range

松式标配147mm兼有144mm, 154mm; 紧式标配152mm   loose parts 147mm,also have 142mm. tight parts 152mm.

纱架平衡器yarn stand balancer

弹簧平衡调节卷绕压力spring balance adjustment winding pressure

纱线探测器yarn prober

带光学传感器optical sensors

筒纱最大直径bobbin max diameter

250mm

启动 / 停止并带大按钮开关ON/OFF  button switch

单锭薄膜开关控制,LED实时显示卷绕米数,车头液晶屏单面总控Single spindle film switch control, LED real-time display of the number of meters, the front side of the liquid crystal screen one side of the total control.

径向防叠装置radial preventing stack

电脑控制径向防叠参数设定computer control radial preventing stack setting parameters

往复吹吸清洁器round blowing and suction cleaner

1100W(清洁器功率) power

消耗功率power consumption

90W/(最高速度),加清洁器电机功率90w/spindle(max speed), and cleaner power

电源current source

三相three-phase power 400V+/-10% ,  50/60Hz

12锭主机重量/尺寸 the weight /size of 12 spindles

350kg  2110mm(length)*950mm(wide)*1500mm(high)

吸尘器重量/尺寸the weight /size of cleaner

125kg 根据锭数确定 according to the quantity of spindle

车头电控箱重量/尺寸 the weight /size of electric control bos

 45kg  700 mm(length)*300mm(wide)*1320mm(high)

Copyright © 2021 浙江展威智能装备有限公司  All Rights Reserved.  
地址:浙江省桐乡市崇福镇杭福路1336号53幢1号   电话:400-8978006  联系人:吴经理